Furnace maintenance season is in full swing, and we’re getting a lot of inquiries about one-off maintenance vs. furnace maintenance plans.

It’s up to you to decide, of course, but our WeCare Protection Plus Plan is the best value your family can get from a maintenance plan.

furnace maintenance lambton
Replacing your furnace filter.

You get:

  • Annual maintenance, including the full checklist below.
  • No extra charge for parts and labour.
  • A 100% satisfaction guarantee.
  • No annual maximums.

We think the value is unbeatable and we’re happy to be transparent about what it includes, because we think you’ll see the value too.

When you book any furnace maintenance visit with one of our technicians, here’s what you get.

Furnace maintenance in Lambton County

Whether you’re a maintenance plan subscriber or favour one-off service, you get the same comprehensive maintenance procedure, including:

  1. Check and adjust thermostat levels.
  2. Check for all safety controls and wire connections.
  3. Cleaning and inspection of all burners and the burner compartment.
  4. Perform a visual inspection of the heat exchanger.
  5. Check and clean the thermocouple or flame sensor.
  6. Check, clean the igniter, spark electrode and pilot.
  7. Furnace maintenance in Lambton
    Furnace maintenance in Lambton

    Check and replace filters.

  8. Remove and clean the blower, test run the capacitor for performance benchmarks.
  9. Adjust dampers for heating / cooling mode.
  10. Check and flush the condensate drains or traps.
  11. Inspect the venting system for leaks, debris, or anything else out of the ordinary.
  12. Check for the required service access.
  13. Check for adequate combustion air requirements.
  14. Lubricate all moving parts.
  15. Cycle the furnace and monitor the ignition and flame for issues.
  16. Check and record manifold pressure/clock input.
  17. Check temperature rise and adjust blower speed as required.
  18. Perform CO test and record the readings.
  19. Test the fuel line for leaks at the appliance.
  20. Check gas pipe pressure test tag.
  21. Check for manufacturer’s installation and operation manuals.
  22. Clean the area surrounding the furnace.
  23. Compare utility costs and equipment life expectancy with the homeowner.
  24. Offer replacement batteries for the smoke detector.
  25. Check for a CO alarm.
  26. Review and document results and recommendations with the client.

When your furnace maintenance visit is complete, you know every part of your furnace was inspected, cleaned, verified and ready to keep your family warm and comfortable through the fall, winter and spring.

Give us a call today to book your fall furnace maintenance visit early so you aren’t stuck waiting during the October rush.


Sign up to receive helpful home comfort tips and reminders

  • This field is for validation purposes and should be left unchanged.
climatecare logo
baeumler logo
carrier logo
energystar logo
hrai logo
tssa logo
wsib logo